Parts

Grease fitting pack

mixture of straight, 45 degree and 90 degree

HAIRPIN #10

HAIRPIN #10

HANGER - BALL BEARING - HT/HTR/LTR FOR 20" BLADES OR LARGER

6" W x 14" L 

HANGER - BALL BEARING - D/LTL MODEL

6" W x 11 3/8" L 

HANGER - BALL BEARING - LTR MODEL FOR 18" BLADES OR SMALLER

6" W x 11 7/8" L 

HANGER - CAST BEARING - D MODEL & LTL

6" x 9 1/2" Bottom holes are 3" on center and 1/2" diameter Top holes are 3 1/2 on center  and 5/8" diameter

HANGER - CAST BEARING - LTR MODEL FOR 18" BLADES OR SMALLER

9 1/2 " L X 6" W   X  4-1/2 AT mounting bolts

HD Flywheel Assembly 15 spline (NEW DESIGN)

UPDATED DESIGN Older stumpjumpers had a round "dish" shape to them. New design is oblong and more heavy duty. **old ones should be 13 1/2" center to center bolt hole 1 1/4" bolt hole approx. 20" overall width  Fits 15 Spline Output Shafts Confirm...

HEAVY DUTY BLADE 1/2" X 3 1/2" X 24 1/2" WITH 2" OFFSET (Left Blade)

***Note: These were used on the Boss 10 and some other 10 foot cutters Verify length before ordering 1/2" X 3 1/2" X 24 1/2" WITH 2" OFFSET (22 1/2" center of hole to end, 24 1/2" overall length) Left Blade   **Blades sold individually.  If...

HEAVY DUTY BLADE 1/2" X 3 1/2" X 24 1/2" WITH 2" OFFSET (Right blade)

***Note: These were used on the Boss 10 model 10 foot cutter and some 5 foot cutters Verify length before ordering HEAVY DUTY BLADE 1/2" X 3 1/2" X 24 1/2" WITH 2" OFFSET Right Blade 22 1/2" center of hole to end, 24 1/2" overall length **Blades sold...

HEAVY DUTY BLADE 1/2" X 3 1/2" X 24 1/2" WITH 3" OFFSET (Left Blade)

Left blade  HEAVY DUTY BLADE 1/2" X 3 1/2" X 24 1/2" WITH 3" OFFSET 22 1/2" center of hole to end, 24 1/2" overall length **note: used on Boss 10's later models until switch made to HD10   **Blades sold individually.  If needing a set...

HEAVY DUTY BLADE 1/2" X 3 1/2" X 24 1/2" WITH 3" OFFSET (Right Blade)

***Note: These were used on the Boss 10 and other 10 foot cutters Verify length before ordering HEAVY DUTY BLADE 1/2" X 3 1/2" X 24 1/2" WITH 3" OFFSET Right Blade 22 1/2" center of hole to end, 24 1/2" overall length   **Blades sold individually...