Parts

GEARBOX PEDESTAL FOR CENTER TRANSFER BOX (SHD15)

GEARBOX PEDESTAL FOR CENTER TRANSFER BOX (SHD15)  

GEARBOX shear pin / 15 spline output

Gearbox used on some of the 6, 7, 8 and 10 foot cutters. Smooth Input Shaft with 15 Spline Output Shaft Longer output shaft (approx 6") Measure accross the output shaft, for the bolt circle. It should be approx. 8” Available Parts...

GEARBOX SHEARPIN 601SC, M72SC, M60H, 505C, 606C (CHEETAH) 15 SPLINE

Available Parts List Ref # ---  Parts# ----- Description E38 - 45-H-0141 - Input Shim/Gasket, round -------- click here E44 - 45-STD-H061 - Snap Ring (45-319) ------- click here E45 - 45-STD-H062 - Snap Ring (45-419-A) ------- click here E46 -...

GEARBOX TILLER (CHEETAH)

RTI-50 Parts List E46 - 45-STD-H063 -  Snap Ring, Input Shaft - click here E47 - 45-STD-H072 -  Input Oil Seal - click here G142 - 75-STD-H096 -  Pressure Relief Plug 1/2" - click here Z3 - NB-012PP - Pipe plug, 1/8" - click here Z23 -...

GEARBOX, 20 TL SPLINE 100HP (CHEETAH)

Available Parts List Ref # ---  Parts# ----- Description F24 - 50-STD-H074 - Output oil seal 75-450 ---------- click here G157 - 75-H-451 - Input seal for 20 spline shaft -------- click here G10 - 75-TL-65 - Snap ring for 20 spline slip clutch...

GEARBOX, 6 SPLINE INPUT, 15 SPLINE OUTPUT

Available Parts List Ref # ---  Parts# ----- Description E38 - 45-H-0141 - Input Shim/Gasket, round -------- click here E44 - 45-STD-H061 - Snap Ring (45-319) ------- click here E45 - 45-STD-H062 - Snap Ring (45-419-A) ------- click here E46 -...

GEARBOX, SHEARPIN (CHEETAH)

75PRC61146-N  Available Parts List Ref # ---  Parts# ----- Description E46 - 45-STD-H063 - Snap ring, input (45-tl-65) --------- click here  F24 - 50-STD-H074 - Output oil seal 75-450 50.84 x 68.5 x 11---------- click here G115 -...

GREASE FITTING - 1/4" drive in

GREASE FITTING - 1/4" -- drive in

Grease fitting pack

mixture of straight, 45 degree and 90 degree

HAIRPIN #10

HAIRPIN #10

HANGER - BALL BEARING

6" W x 13 1/2 - 14" L  special hanger

HANGER - BALL BEARING - HT/HTR/LTR FOR 20" BLADES OR LARGER

6" W x 14" L